 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VISHAY BAR65V-02V Vishay Semiconductors RF PIN Diode Mechanical Data Case: Plastic case (SOD 523) Weight: 1.5 mg Cathode Band Color: Laser marking Packaging Codes/Options: GS08 / 3 k per 7" reel (8 mm tape), 3 k/Box A Description With the very low forward resistance combined with a low reverse capacitance the BAR65V-02V is ideal for RF-signal switching. Depending on the forward current (If) the forward resistance (rf) can be reduced to only a few hundred m. Driven In the reverse mode the "switch is off" , the isolation capacitance is less than 1pF. Typical applications for this PIN Diode are wireless, mobile and TV-systems. C 16863 Applications * For frequency up to 3 GHz * RF-signal switching * Mobile, wireless and TV-Applications Features * Space saving SOD523 package with low series inductance * Very low forward resistance * Small reverse capacitance Parts Table Part BAR65V-02V Ordering code BAR65V-02V-GS08 E Marking Remarks Tape and Reel Package SOD523 Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Reverse voltage Forward current Junction temperature Storage temperature range Test condition Sub type Symbol VR IF Tj Tstg Value 30 100 150 - 55 to + 150 Unit V mA C C Maximum Thermal Resistance Tamb = 25 C, unless otherwise specified Parameter Junction soldering point Test condition Symbol RthJS Value 100 Unit K/W Electrical Characteristics Tamb = 25 C, unless otherwise specified Parameter Reverse voltage Reverse current Forward voltage VR = 20 V IF = 100 mA Test condition IR = 10 A Sub type Symbol VR IR VF Min 30 20 1.1 Typ. Max Unit V nA V Document Number 85644 Rev. 1, 23-Oct-02 www.vishay.com 1 BAR65V-02V Vishay Semiconductors Parameter Diode capacitance Test condition f = 1 MHz, V R = 0 f = 1 MHz, V R = 1 V f = 1 MHz, V R = 3 V Forward resistance f = 100 MHz, IF = 1 mA f = 100 MHz, IF = 5 mA f = 100 MHz, IF = 10 mA Charge carrier life time IF = 10 mA, IR = 6 mA, iR = 3 mA Sub type Symbol CD CD CD rf rf rf trr Min Typ. 0.65 0.55 0.50 1 0.6 0.52 150 VISHAY Max 0.9 0.8 0.95 0.9 Unit pF pF pF ns Typical Characteristics (Tamb = 25C unless otherwise specified) 100.0 rf - Forward Resistance ( W ) f = 100 MHz 10.0 1.0 0.1 0.10 16898 1.00 10.00 100.00 IF - Forward Current ( mA ) Figure 1. Forward Resistance vs. Forward Current 0.7 CD - Diode Capacitance ( pF ) 0.6 0.5 0.4 f = 1 MHz 0.3 0.2 0.1 0.0 0 5 10 15 20 25 30 16899 VR - Reverse Voltage (V) Figure 2. Diode Capacitance vs. Reverse Voltage Document Number 85644 Rev. 1, 23-Oct-02 www.vishay.com 2 VISHAY Package Dimensions in mm BAR65V-02V Vishay Semiconductors ISO Method E 16864 Document Number 85644 Rev. 1, 23-Oct-02 www.vishay.com 3 BAR65V-02V Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. VISHAY 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Seminconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 Document Number 85644 Rev. 1, 23-Oct-02 www.vishay.com 4 |
Price & Availability of BAR65V-02V
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |